Enviroflo Heat Pump
Enviroflo Heat Pump
Upgrade to a more efficient hot water system.
Designed and manufactured in Australia, the Rinnai Enviroflo range of Electric Integrated Heat Pump hot water systems deliver a comprehensive set of installation configurations perfect for the various site specific requirements around the country. The innovative controller works to maximise hot water availability while using up to 75% less energy*, compared to a standard electric storage tank. They are available in a range of capacity sizes, and can be equipped with magnesium or hard water anodes to further customise their capabilities to suit the application.
A standard feature of the Rinnai Enviroflo is the single element boost, that allows the product to be used in high demand applications or even cold ambient conditions, meaning you will enjoy always hot water all year round.
Built locally to outlast the tough Australian conditions, these tanks have been designed and tested to operate with water pressures up to 1000kPa, much higher than normal. Best of all, they are lighter in weight to aid quick and safe installation whilst having a minimal impact on the environment.
* Energy saving of up to 75% based on a Rinnai Enviroflo 250ltr/315ltr Heat Pump, when compared to a standard electric water heater of the same capacity during peak winter load in Zone 1 based on AS/NZS4234. Savings will vary depending upon your location (Zone 1-5), type of water heater being replaced, hot water consumption and associated fuel tariffs.
Highly efficient
Perfect for replacing an electric storage tank
Australian made
Available in 250L or 315L version
Enviroflo Heat Pump
- Energy Efficient
- Environmentally Focused
- Quiet Operations
- Perfect for replacing an electric system
- 1000 kPa maximum water pressure rating
- Class leading weight for easy handling and installation
- 250L and 315L capacities available
- Australian designed and built with a high level of product quality.
Federal Small-Scale Technology Certificate (STC’s)
Enviroflo’s innovative design allows it to be eligible for Grants through the Federal Governments Small-scale Renewable Energy Scheme, generously covering a proportion of the up-front costs of purchasing and installing the system. These grants are called Small-scale Technology Certificates (STC’s) and are offered based on how sustainable a hot water system is. Your STC rebate value will depend on your installation location, see the map above for your geographic Zone locations.
|
Certified System Code |
STCs from Jan 1st 2023 to Dec 31st 2023 |
STCs from Jan 1st 2024 to Dec 31st 2024 |
||||||||
|
Zone 1 |
Zone 2 |
Zone 3 |
Zone 4 |
Zone 5 |
Zone 1 |
Zone 2 |
Zone 3 |
Zone 4 |
Zone 5 |
|
| Heat Pump | ||||||||||
| EHPA250VMA |
20 |
20 |
24 |
25 |
24 |
18 | 17 | 21 | 22 | 21 |
| EHPA315VMA |
20 |
19 |
24 |
24 |
23 |
18 | 16 | 21 | 21 | 20 |
| EHPA250VMAH |
20 |
20 |
24 |
25 |
24 |
18 | 17 | 21 | 22 | 21 |
| EHPA315VMAH |
20 |
19 |
24 |
24 |
23 |
18 | 16 | 21 | 21 | 20 |
State Grants
Victoria
For Victorian consumers there are additional rebates available for replacing inefficient hot water systems with Heat Pumps. Victorian Energy Efficiency Certificates (VEECs) plus a Solar Victoria rebate are offered for eligible installations on top of the Federal STC grants - making the conversion to a Rinnai Enviroflo Heat pump the obvious low-cost choice.
New South Wales
For New South Wales consumers there are additional rebates available for replacing inefficient hot water systems with Heat Pumps. Energy Savings Certificates (ESCs) are offered for eligible installations on top of the Federal STC grants - making the conversion to a Rinnai Enviroflo Heat pump the obvious low-cost choice.
*The value of STCs and State Grants are a tradable, market driven commodity. Values are subject to daily variation and are valid as of 01/05/2022
| Model | Description | A Diameter (mm) |
B Hot Outlet (mm) |
C Cold Inlet (mm) |
D Height (mm) |
Empty Weight (Kgs) |
Sizing Guide |
| EHPA250VMA | 250L Enviroflo | 627 | 1215 | 90 | 1847 | 112 | Up to 5 People 2 Bathrooms – 4 Bedrooms |
| EHPA250VMAH | 250L Enviroflo (hard water) | ||||||
| EHPA315VMA | 315L Enviroflo | 627 | 1430 | 90 | 2134 | 132 | Up to 6 People 3 Bathrooms – 5 Bedrooms |
| EHPA315VMAH | 315L Enviroflo (hard water) |
| Technical Information | Value | |
| Noise | 48 dB(A) | |
| Ambient Temperature Limits (for heat pump operation – element will operate beyond these limits) | -1°C – 45°C | |
| Ingress Protection | IP24IP24 | |
| Storage Cylinder – Hot Outlet and Cold inlet Connections | ISO 7.1 ¾” RP | |
| Storage Cylinder – PTR Valve Connection | ISO 7.1 ½” RP | |
| PTR Setting | 1000 kPa / 10 kW | |
| ECV Fitted | Fit PLV if mains pressure exceeds | 680 kPa |
| Recommended PLV pressure rating | 500 kPa | |
| ECV Not Fitted | Fit PLV if mains pressure exceeds | 800 kPa |
| Recommended PLV pressure rating | 500 kPa | |
| Rated Input Electric Element (Factory Wired) | 2.4 kW | |
| Rated Input Refrigeration Module (Factory Wired) | 1.0 kW | |
| Total Rated Input (To be wired by installer) | 3.4 kW | |
| Maximum Energy Output | 4.29 kW | |
| Power Supply | 240 V AC, 50Hz | |
| Current | 15 A | |
| Refrigerant Type / Mass | R290 / 270g | |
| COP (32.6°C Ambient 21.1°C cold water inlet) | 7.22 | |
| Heat Pump heating capacity (32.6°C Ambient 21.1°C cold water inlet) | 5.2 kW | |
Warranty*
7 years cylinder parts
3 years cylinder labour
3 years refrigeration components parts and labour
1 year other components parts and labour
*The warranty periods above apply only to domestic use. For further details, please refer to the Warranty Booklet (click here). Without limiting the above periods, a 5-year whole-of-product warranty applies where a rebate has been received under the Solar Victoria Solar Homes Program for installations from 1 July 2023. For further details, contact Rinnai on 1300 555 545.
(1) Refrigeration Components include but are not limited to: compressor, condenser, expansion valve, heat exchanger, evaporator and associated pipe work.
(2) Other Components include but are not limited to: sensors, thermostats, valves, electric heating elements, anodes.* Inner Storage Cylinder
Photography
