Enviroflo E Series
Enviroflo E Series
Upgrade to a more efficient Hot Water system
The Rinnai Enviroflo E Series Electric Heat Pump operates by utilising a heat exchange system that absorbs the heat from the surrounding air and uses it to heat your water. The innovative controller works to maximise hot water availability while using up to 75% less energy*, compared to a standard electric storage tank.
Combine this with the included Wi-Fi enabled Timer Function allowing you to utilise solar PV usage, and watch your energy consumption drop. These tanks have been designed and tested to operate with water pressures up to 850kPa. Best of all, they are lighter in weight to aid quick and safe installation whilst having a minimal impact on the environment.
* Energy saving of up to 75% based on a Rinnai Enviroflo 265ltr Heat Pump when compared to a standard electric water heater of the same capacity during peak winter load in Zone 1 based on AS/NZS4234. Savings will vary depending upon your location (Zone 1-5), type of water heater being replaced, hot water consumption and associated fuel tariffs.
High Energy Efficiency
Perfect for replacing an electric storage tank
Big Performance
Available in 265L
Enviroflo E Series
- Energy Efficient
- Big Performance
- Convenient Wi-Fi Timer
- Reliable
- Auto Disinfection
- Environmentally Focused
- Defrost Control
- Adaptable for All Climates
Federal Small-Scale Technology Certificate (STC’s)
Enviroflo’s innovative design allows it to be eligible for Grants through the Federal Governments Small-scale Renewable Energy Scheme, generously covering a proportion of the up-front costs of purchasing and installing the system. These grants are called Small-scale Technology Certificates (STC’s) and are offered based on how sustainable a hot water system is. Your STC rebate value will depend on your installation location, see the map above for your geographic Zone locations.
| Certified System Code | STCs from Jan 1st 2023 to Dec 31st 2023 | STCs from Jan 1st 2024 to Dec 31st 2024 | ||||||||
| Zone 1 | Zone 2 | Zone 3 | Zone 4 | Zone 5 | Zone 1 | Zone 2 | Zone 3 | Zone 4 | Zone 5 | |
| EHPS265VMT | 20 | 20 | 24 | 25 | 25 | 18 | 17 | 21 | 22 | 22 |
State Grants
Victoria
For Victorian consumers there are additional rebates available for replacing inefficient hot water systems with Heat Pumps. Victorian Energy Efficiency Certificates (VEECs) plus a Solar Victoria rebate are offered for eligible installations on top of the Federal STC grants - making the conversion to a Rinnai Enviroflo Heat pump the obvious low-cost choice.
New South Wales
For New South Wales consumers there are additional rebates available for replacing inefficient hot water systems with Heat Pumps. Energy Savings Certificates (ESCs) are offered for eligible installations on top of the Federal STC grants - making the conversion to a Rinnai Enviroflo Heat pump the obvious low-cost choice.
*The value of STCs and State Grants are a tradable, market driven commodity. Values are subject to daily variation and are valid as of 01/05/2022
| Model | Description | Diameter (mm) | Hot Outlet (mm) | Cold Inlet (mm) | Height (mm) | Empty Weight (Kgs) |
| EHPS265VMT | 265L Enviroflo | 620 | 1131 | 136 | 1764 | 120 |
| Technical Information | Value | |
| Noise | 46 dB(A) | |
| Ambient Temperature Limits (for heat pump operation – element will operate beyond these limits) | -7°C to 43°C | |
| Ingress Protection | IP24 | |
| Storage Cylinder – Hot Outlet and Cold inlet Connections | ISO 7.1 ¾” RP | |
| Storage Cylinder – PTR Valve Connection | ISO 7.1 ¾” RP | |
| PTR Setting | 850 kPa / 46 kW | |
| ECV Fitted | Fit PLV if mains pressure exceeds | 680 kPa |
| Recommended PLV pressure rating | 500 kPa | |
| ECV Not Fitted | Fit PLV if mains pressure exceeds | 800 kPa |
| Recommended PLV pressure rating | 500 kPa | |
| Rated Input Electric Element (Factory Wired) | 2.1 kW | |
| Maximum Input Refrigeration Module (Factory Wired) | 1.1 kW | |
| Total Maximum Input | 2.1 kW | |
| Maximum Energy Output | 4.5 kW | |
| Power Supply | 220V-240V AC/50Hz | |
| Maximum Current | 10 Amps (15 Amp plug fitted) | |
| Refrigerant Type / Mass | R290 / 380g | |
| COP (32.6°C Ambient 21.1°C cold water inlet) | 7.6 | |
| Heat Pump heating capacity (32.6°C Ambient 21.1°C cold water inlet) | 3.6 kW |
Warranty*
5 years cylinder parts
3 years cylinder labour
3 years refrigeration components parts
1 year refrigeration components labour
1 year other components parts and labour
*The warranty periods above apply only to domestic use. For further details, please refer to the Warranty Booklet (click here). Without limiting the above periods, a 5-year whole-of-product warranty applies where a rebate has been received under the Solar Victoria Solar Homes Program for installations from 1 July 2023. For further details, contact Rinnai on 1300 555 545
(1) Refrigeration Components include but are not limited to: compressor, condenser, expansion valve, heat exchanger, evaporator and associated pipe work.
(2) Other Components include but are not limited to: sensors, thermostats, valves, electric heating elements, anodes.* Inner Storage Cylinder
