S26 Solar Booster
S26 Solar Booster
The S26 gas booster uses all the technological advancements of the famous INFINITY with built in intelligence for solar boosting. It is factory set at a temperature of 70 degrees Celcius and offers 26 l/min maximum flow rate to service the fixtures in your home. Years of service can be expected when used in either a Rinnai Sunmaster or Rinnai Prestige solar hot water system.
Locate Your Nearest Store
Designed specifically for solar
Never runs out of hot water
Perfect for a multi bathroom home
External model built to withstand Australian conditions
12 Year Heat Exchanger warranty
Superior technology
- Quality Japanese design and manufacturing
- Precise temperature control for safety and convenience
- Compact design allows installation flexibility
- Suitable for higher ambient water temperatures
- Compatible with low flow rated shower fixtures (3 Star - 7.0 to 9.0 l/min)
Rinnai quality
- After sales support
- 12 year warranty on heat exchanger
| Colour | Dune |
| Factory Default Temperature (Celsius) | 70 |
| Water Pressure (kPa) : Minimum | 160 |
| Water Pressure (kPa) : Maximum | 1000 |
| Gas Rate (MJ) : Maximum | 188 |
| Flow Rate(l/min) : Maximum | 26 |
| Star Rating | N/A |
| Connection Sizes Gas/Hot/Cold (mm) | 20/20/20 |
| Status Monitor | No |
| Width (mm) | 350 |
| Depth (mm) | 194 |
| Height (mm) | 530 |
| Height inc Brackets (mm) | 571 |
| Hot Water Outlet from wall (mm) | 87 |
| Hot Water Outlet left from Centre (mm) | 105 |
| Cold Water Inlet from wall (mm) | 68 |
| Cold Water Inlet right from centre (mm) | 10 |
| Gas Connection from wall (mm) | 77 |
| Gas Connection right from centre (mm) | 83 |
| Gas Connection Length from base (mm) | 40 |
| Cold Connection Length from base (mm) | 50 |
| Hot Connection Length from base (mm) | 39 |
| Water controller compatible | No |
Note: Can NOT be used as a stand alone continuous flow water heater
Photography
PDF
